The CycleOps ANT+ Speed or Cadence Sensor accurately tracks your speed and cadence and is used along with a power meter or with an ANT+-compatible cycling computer (power meters and ANT+ computers sold separately). This unit easily attaches on the frame next to your left crankarm and rear wheel to monitor and display your cadence or speed on your cycling computer of choice.
Pioneer's Shimano Dura Ace 9000 Power Meter is a revolutionary power meter that attaches stealthily to the left crankarm. The Dura Ace 9000 left crank arm meter allows every rider power-based (also called watt-based) training performance, allowing you to fine-tune your pedaling to find race-winning form without breaking the bank. With advanced technology accurate to +/- 2%, ANT+ transmitting, active temperature compensation, and a mere 22 grams of weight, the Pioneer power meter is perfect for any cyclist. Additionally, installation is fast, simple, and clean with zero wires, magnets, or zip ties. If you find yourself addicted to the data and crave more, upgrade kits that retroactively add drive-side power are available (sold separately).
When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the new DFour measures power in the heart of the bicycle — the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DFour represents the state of the art in power meter technology. Every innovation in Quarq’s next-generation DZero platform is channeled into the DFour Power Meter Crankset. It embodies 10 years of Quarq technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app and compatibility with BB386EVO bottom brackets. - The DFour power meter is a bolt-on upgrade for Shimano’s 11-speed Dura-Ace 9000, Ultegra 6800 and 105 5800 drivetrains. - Must be paired with a compatible SRAM bottom bracket. - ELSA RS power meter owners can upgrade using the DFour Power Meter Spider. - Free firmware upgrades with the Qalvin app. - Compatible with BB30 bottom bracket. - BB30 versions ship with the spacers and wave washer required for BB386EVO installation.
$1,342.38 - $1,359.98
The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included
$1,351.18 - $1,359.98
In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE
$968.98 - $977.48
- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: Ant USB
$1,121.95 - $1,308.98
The crankset is the heart of your bicycle and where you’ll find the SRAM RED Quarq power meter. The sole job of the crankset is to convert the effort from both legs to forward motion. It is the perfect place to measure power. This power meter works for every discipline: Road, triathlon, time trial, and cyclo-cross. The chainrings are replaceable should your bike, discipline, or ability change. - A direct force power meter that measures total power output from both legs with +/-1.5% accuracy - Works for every discipline: Road, triathlon, time trial, and cyclo-cross - No compromises on materials, shifting, wheels, or pedal choice - Proven by pro teams and athletes throughout the world – Cobbled Classics, Giro d’Italia, Tour de France, Vuelta a España, World Championships - Number 1 at the Ironman World Championship for the last three years - Uses a hidden bolt to mount the chainrings – compatible SRAM chainrings ensure the derailment pin lines up behind the crank arm - 10K – programmed with over 10,000 data points to eliminate temperature effects on power measurement - AxCad – A multi-axis accelerometer switches the power meter on and measures cadence, simplifying installation and operation - Breakthrough Materials – Exogram hollow carbon fiber crank arms – the lightest, strongest crank arms SRAM makes – minimize weight and maximize speed [ELSA RS, ELSA R and SRAM RED] - Easy to use (and reuse) – LED indicator and visible ANT+ ID - The replaceable CR2032 battery never leaves you without power - Manual and automatic zeroing make it truly set and forget - Built to Last – IPX7 waterproof rating, 2-year warranty, free firmware updates, and acclaimed international support - Moves with you from bike to bike - With Quarq's free Qalvin app – available for Windows, Mac, iOS and Android – you can set the zero offset, check battery voltage, run diagnostics, and perform firmware updates for free Arm Material: Carbon arms, Machined alloy spider Weight: 778 grams (GXP 172.5mm 53x39 BB not included) * Chainrings and BB sold separately
$599.99 - $714.00
The CINCH Power Meter gives you the tool to train for the Enduro and XC glory you truly deserve. Protected in your BB Shell, the CINCH Power Meter not only gives you the advantage you need to gauge your training and push your boundaries, but it does it with the compatibility and performance you have come to expect from CINCH. Thanks to the adaptable spindle, you can pick your poison from NEXT SL G4 to Turbine R cranks, and with the Race Face CINCH App and both ANT+ and Bluetooth, you can hook it up to your favorite head unit and be on your way to the wattage cottage in no time. - Power Accuracy +/- 2% - Cadence & pedal efficiency data - Dual Bluetooth low energy technology / ANT+ for head unit compatibility - Battery life over 400h & USB rechargeable - Utilizing CINCH for 1x or 2x configurations - Cinch Power Meter App for iPhone or Android - Just 65g more than standard 134mm mountain spindle
- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB
Pioneer's power meters are simply some of the best power-monitoring systems on the planet, and the SGX-CA500 computer is your chance to get the most out of your power meter and have a world-class data display. Pioneer has created the first, and only, power meter that measures power output and pedaling stroke efficiency for each individual leg, and the SGX-CA500 lets you analyze this data in real time. A few quick swipes give you access to your state-of-the-art ride data, and intuitive controls allow for scrolling, zooming, and screen customization to let you see what you want, when you want it. The 1.87-inch LCD screen makes it incredibly easy to see critical data, even if you are on the rivet up the final climb. As an added bonus, users of Shimano’s Di2 electronic road bicycle shifting system can now utilize the SGX-CA500 to track gearing and system status as they ride. - Delivers high functionality for practical situations, in a small, lightweight (75 g) package - Visualizes pedaling state and efficiency through graphical displays of force vectors (when used together with a pedaling monitor sensor) - Enables new modes of training focused on pedaling skill development - Displays over 100 data types, such as power, cadence, speed, and incline, all in real time - Easy, intuitive touch-panel operation, even when wearing full-finger gloves - Upload data to Cyclo-Sphere, our online data analysis service, via USB or Wi-Fi connection (Wi-Fi Internet connection required) - Weight: About 75 g - Dimensions: 58 mm (W) x 58 mm (H) x 19 mm (D) (without projection parts) - Connector: microUSB - Water-resistance: This device has a water-resistance rating of IPX-6/IPX-7 - Communications system (sensors): ANT+ - Communications method (network): Wi-Fi - Positioning system (latitude/longitude): GPS - Positioning system (altitude): Atmospheric pressure sensor - Display: 160x128 pixel, horizontal 1.87-inch outdoor type, Black and white touch panel (resistive touch display) - Built-in flash memory: 4 GB (user available capacity 3 GB) - Guaranteed operational temperature range: -10 to 50°C - Charging temperature: 0 to 45°C - Power supply voltage: DC 5V - Battery type: Lithium-ion battery - Battery operating time: Approximately 12 hours (the battery operating time may decrease depending on the operating conditions) - Charging time: Approximately 4 hours (Power off or normal charging) - Accessories: Bracket, USB cable, Strap, Quick Start Guide, Warranty card, Important Information for the User - Specifications and design are subject to change without notice.
Garmin's Vector 2 Replacement Pedal Pod replaces your old worn-out one for accurate power measurement and countless miles of more riding. • Standard: fits crank arms 15-18mm thick and up to 44mm wide • Large: fits crank arms 12-15mm thick and up to 44mm wide • ANT+ transmitter • User-replaceable battery (2032 coin cell) • 175 hours of active cycling operation • Compatible with Vector 2 and Vector S2 • Replacing a pedal pod does not impact Vector power or cadence accuracy • Single pod only
Upgrade your Vector S pedal-based power meter to the dual-sensing Vector 2S system. Garmin's Vector S to Vector 2S Upgrade Kit can accommodate both standard (12-15 mm) and large (15-18 mm) crank arms. Upgrading allows you to take that next step in performance by measuring the power from both legs, which can reveal strength deficiencies between your left and right side.
DZero is Quarq's next-generation power meter platform for those who live to be challenged, pushed, and tested in the toughest scenarios imaginable. Now Quarq has introduced a DZero spider designed to replace the factory spider on Specialized's S-Works carbon crankset. Quarq DZero for Specialized embodies 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth low energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the Qalvin BLE app. You also get AxCad accelerometer cadence, the easy-to-replace CR2032 battery, an IPX7 waterproof rating and a 2-year warranty. Features & Benefits: - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad – no cadence magnet required - 10K Temperature Compensation - Battery – CR2032, 200-hour battery life, change without tools - Power Balance - OmniCal – swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy – within 1.5%, measuring both legs - Free firmware upgrades with the Qalvin app Essential Details: - Traditional 5-arm spider compatible with Specialized S-Works Carbon Road Crank Arms from 2013-Current. - Available in 130 BCD and 110 BCD. - Replaces the standard spider. - A Specialized lockring tool is required for installation.
The ROX GPS 11.0 Set contains an R2 DUO COMBO speed and cadence sensor and an R1 DUO heart rate transmitter to take your training to the next level. Connect with sensors and power meters via ANT+. Transfer data to smart phones and tablets via Bluetooth Smart and the SIGMA LINK app. The new Strava live segments, GPS track navigation, sport profiles, and many more features are guaranteed to make the ROX GPS 11.0 the ideal training tool for the most demanding cyclists. Bike functions: - Current speed (kmh/mph) - Average speed - Maximum speed - Current vs. average speed comparison - Distance - Training time - Duration - Calories - Clock (12/24h) - Date - Cadence - Average cadence - Maximum cadence - Average expansion - Average expansion uphill - Average expansion downhill Temperature functions: - Current temperature - Minimum temperature - Maximum temperature Altitude measurement functions: - Altitude - Incline (%) - Rate of ascent in m/min - Altitude profile graph - Altitude uphill - Maximum altitude - Distance up hill - Training time uphill - Average speed uphill - Average rate of ascent - Maximum rate of ascent - Distance downhill - Training time downhill - Average speed downhill - Average rate of descent - Maximum rate of descent - Average slope downhill - Maximum slope downhill Navigation functions: - Time to destination - Estimate time of arrival (ETA) - Distance to destination - Direction - Track view Lap functions: - Manual or automatic laps - Number of laps - Time in lap - Distance in lap - Average speed in lap - Calories in lap - Average altitude in lap - Maximum altitude in lap - Elevation gain in lap - Elevation loss in lap - Average incline in lap - Average decline in lap - Average rate of ascent in lap - Average rate of descent in lap - Average balance n lap - Average power in lap - Maximum power in lap - Normalized power (NP) in lap - Normalized power (NP) in last lap - Average cadence in lap - Maximum cadence in lap - Average heart rate in lap - Maximum heart rate in lap - Pedaling time in lap - Pedaling index in lap - List of laps - Average balance in automatic lap - Average power in last lap - Maximum power in lap Power functions: - Balance - 3 sec average balance - 10 sec average balance - 30 sec average balance - Average balance - Pedal smoothness - Power - Power in % FTP - Average power - 3 sec average power - 10 sec average power - 30 sec average power - Intensity Factor (IF) - Maximum power - Power in KJ - Normalized Power (NP) - Watt/kg power ratio - Power zones - Torque effectiveness - Power target zone Heart rate functions: - Heart rate - Average heart rate - Maximum heart rate - Minimum heart rate - % HR max. - Average % of HR max - Zone bars (heart rate/CAD/SPD) graph - Intensity zones (graph) - Heart rate (graph) Miscellaneous: - STRAVA live segments - ANT+ - Configuration of custom training programs - SRAM eTap - Shimano Di2 - Digital three-axis compass - Barometric altitude measurement - Sports profiles (incl. customizable training views) - Waypoints with custom text - Up to 100 hours log capacity - Backlight - Water tight in accordance with IPX7 - Graphic data evaluation in the DATA CENTER - GPS accuracy indicator - Battery capacity (in %) - Di2 battery status - Expansion - Di2 front gear - Di2 gear ratio - Di2 gears - Di2 rear gear
The SRAM XX1 Eagle Power Meter unites Quarq's DZero power meter platform with CARBON TUNED crank arms for robust, intuitive power measurement in the lightest ever chassis. The DZero platform embodies 10 years of Quarq's technology advances and adds new features such as dual Bluetooth low energy and ANT+ wireless data transfer, and the Qalvin BLE app. The companion X-SYNC 2 chainrings are designed specifically for Eagle chains and drivetrains. - Two power meter variations – Conventional and BOOST 148 (52mm chainline). - Requires an X-SYNC 2 or X-SYNC 104 BCD chainring. - Existing XX1 power meter owners can upgrade using an Eagle Power Meter Spider (Conventional, not BOOST). - Free firmware upgrades with the Qalvin app. - 168Q CARBON TUNED crank arms – extreme stiffness and light weight. - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad -- no magnet - 10K Temperature Compensation - Battery -- CR2032, 200 hour battery life, change without tools - OmniCal -- swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy -- within 1.5%, measuring both legs. - Ring and BB not included - Speeds: 11/12 - Crank arm length: 175mm - BB Compatibility: DUB BSA73,DUB PF89.5,DUB PF92,DUB PF30 MTB73,DUB BB30 MTB73 - Chainring Size: n/a - Bolt Circle Diameter (BCD): 104 BCD - Chainline: 49.0mm (standard) / 52.0mm (Boost) - BB Spindle Interface: DUB - Chainring material: n/a - Guard: No Guard - Crank arm material: Carbon - Color (Crank arm): Natural carbon - Power Meter Type: ANT USB
Dual-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3 pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3 has the sensors housed right in the pedals, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Measures total power, left/right balance, cadence and cycling dynamics - Sleek design provides greater cornering clearance and improved stack height - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours - Weight: 316 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/55 mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
Single-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3S pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3S has a sensor housed in the left pedal, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Reports cadence and total power (watts) - Easily upgrades to dual-sensing system - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x2) - Battery life: up to 120 hours - Weight: 324 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/ 55mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
Every innovation in Quarq’s next-generation DZero platform is channeled into DFour: 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth low energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the new Qalvin BLE app. The DFour91 is designed for Shimano’s Dura-Ace R9100 chainrings. It uses Quarq’s lightweight, sturdy ExogramTM carbon crank arms. GXP and BB30 versions work with every bottom bracket shell, including BBright and BB386EVO. - DFour is designed for Dura-Ace 9000 chainrings and compatible with Ultegra 6800 and 105 5800 chainrings - DFour91 is designed for Dura-Ace R9100 chainrings - Must be paired with a compatible SRAM bottom bracket - 8-bolt power meter owners can upgrade using a DFour or DFour91 power meter spider - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad -- no cadence magnet required - 10K Temperature Compensation - Battery — CR2032, 200-hour battery life, change without tools - OmniCal — swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy — within 1.5%, measuring both legs - Chainrings and bottom bracket sold separately
Power to the people! Add the Pioneer Power meter to your existing Shimano crank. Pioneer's crankset-based power meters are simply some of the best power-monitoring systems on the planet, and the Upgrade Kit gives you the chance to add it to your existing crankset. At the heart of the Pioneer Power Meter System are two streamlined strain gauge monitors that can detect the slightest tangent and radial force direction as power is applied to the crank arms. This proprietary system detects the amount and the direction of force at 12 different points in each pedaling stroke for each leg, and allows you to fine tune your pedaling to find race-winning form. The Pioneer Power Meter Installation Kit comes with everything you need to package and send your existing Shimano crank to Pioneer for professional installation and calibration. - Compatible with Shimano Dura-Ace 9000 or Ultegra 6800 (Right Side Cranks Only) - Compatible Crank-arm Lengths: 165, 167.5, 170, 172.5, 175, 177.5, 180mm - Fully Integrated Strain Gauge for force measurement - Easy connectivity with ANT+ compatible Cycle Computers - HDPower Metrics when connected to Pioneer Cycle Computers - Lightweight Sensor Only 40 grams
Benefit from tracking the most interesting, accurate, valuable, motivating and fun information while you're riding your Kinetic trainer with their inRide Watt Meter. It uses Bluetooth communication technology to pair a power sensor pod with Kinetic's inRide iPhone app so you can track your wattage with any Kinetic fluid trainer (smartphones and trainers sold separately). Tailor your workouts to meet your riding goals by logging your entire workout history, and even email your data to a coach for analysis, training, and planning. With the easy-to-install sensor and quick-download app, you'll be rolling and logging data in no time.
The CINCH Power Meter utilizes spindle-based power paired with our highly adaptable EC90 SL Crankset giving you the flexibility to evolve your setup to your needs. Racing 1x for CX? Done, 2x for road? Simple. Changing from 170mm cranks arms to 172.5? You don’t have to buy a new power meter, just move the spindle. Fitting EC90SL to a mountain bike BB shell? Consider the 134mm MTB spindle. With an easily-accessible 400+ hour rechargable battery, The CINCH Power Meter only adds 65g to the EC90 SL’s industry-leading lightweight crankset, providing you cadence readings and calculated pedal efficiency in a clean and protected spindle. And with the CINCH App, you can check battery levels, install updates and calibrate your power meter on the fly.
The ANT+ Micro USB adapter allows on-the-go devices (OTG), such as your Android phone or tablet, to connect to an ANT+ USB stick. Android OTG compatible devices require ANT+ Radio Service and ANT+ USB Service to be installed from the Google Play store. These services allow the adapter to work correctly with an ANT+ USB stick.
Page 1 of 1