Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cranksets

$483.00
Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DZero DUB power meter is made for. Train harder, ride faster and unlock your ultimate potential.  - Specifically designed for use with XX SL Eagle T-Type Thread Mount chainrings (Sold separately) - AXS™™ enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED® and Force eTap AXS™™ cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48
$400.00
When SRAM found ways to make their lightest and stiffest crank even lighter, they went for it. A new process further grams from the hollow carbon arms. Plus they're offering more crankarm lengths than ever before to ensure this crank works for you. - Hollow carbon crank arms are 29g lighter than previous generation - 8-bolt interface compatible with power and non-power AXS spiders and integrated chainrings (Spiders and Chainrings sold separately) - DUB bottom bracket adds durability and simplicity (Sold separately) - Includes DUB Wide Spacer kit (2.5/3.0/4.5/5.5 mm) - 150mm Q-factor / 47.5mm chainline
$113.00
The STYLO 6K DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. 6000 series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - 6003 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 135/142 MTB Hubs
$410.00
True competitors are always looking for a performance advantage — a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets mean simplicity, compatibility, and durability. Specifications: - CRANK ARM LENGTH: 165mm, 170mm, 175mm - BB SPINDLE INTERFACE: DUB - BB COMPATIBILITY: All SRAM MTB WIDE DUB BBs, DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - SPEEDS: 12 - CHAINRING MATERIAL: No rings - BOLT CIRCLE DIAMETER (BCD): Direct Mount (DM) - CHAINLINE: 55.0mm, n/a - CHAINRING SIZE: No rings
$645.00
Enjoy the ultimate advantage of freedom and adventure that Eagle provides combined with the Quarq power meter platform that delivers on accuracy and reliability. The SRAM Eagle XX1 power meter is built to pair with the SRAM Eagle drivetrains, providing a significantly quieter performance and extraordinary durability. Take it on the dirtiest, gnarliest trails while maintaining confidence in your cycling components. You came to perform; the Eagle XX1 power meter will perform with you. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather or trail condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh environments do not hold you back, then you need a product capable of rising to the occasion. The Eagle XX1 power meter is designed to be rough-and-tumble tough. Train harder, ride faster and unlock your ultimate potential. The Eagle XX1 power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. The Eagle XX1 also features Bluetooth low energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. - Speeds: 11/12 - BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Bolt Circle Diameter (BCD): 104 BCD - Chainline: 52.0mm - BB Spindle Interface: DUB - Power Meter Type: ANT+ and BLE - Crank Arms/Chainrings not included
$410.00
True competitors are always looking for a performance advantage - a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets mean simplicity, compatibility, and durability. - Chainrings not included
$99.99
RaceFace Ride crank arms are forged from 6066 aluminum with aggressive styling for a high strength to weight ratio. - Bottom bracket sold separately
$368.00
Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Wide chainline crankset for bikes with the widest gravel tires
$368.00
Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant,integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - BB not included
$119.99
Origin-8's Trackstar Crankset is made of light and durable forged aluminum and features a stylish machined-aluminum 46-tooth 1/8-inch chainring for excellent power transfer on the road and track. - Single speed crankset - Forged AL6061-T6 alloy crankarms - CNC alloy 1/8" 46 tooth chainring - 42mm chainline with 103mm JIS BB
$359.95
The Campagnolo EKAR Crankset is a lightweight and efficient 1x13-speed crank designed for gravel riding and racing. - The 2-piece crank features a strong and durable 630-grade steel alloy crank axle mated to a lightweight carbon fiber spider and unidirectional carbon fiber arm - Must be used with a Campagnolo Pro-Tech bottom bracket - Chainring features a narrow-wide tooth design for efficient drive and maximum chain security - Easy access to external crank bearings - Easily interchangeable alloy rings – no need to disassemble the crankset - Narrow Q-factor – 145.5mm Specifications: - Number of Chainrings: Single - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 123 - Pedal Spindle: 9/16" - Drivetrain Speeds: 13
$113.00
The STYLO 6K DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. 6000-series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - 6003 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs
$1,033.95
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
$57.00
FSA Shimano STEPS eBike replacement crankarms.
$169.99
The Box Four Crankset features a 2-piece design with an oversized bottom bracket interface. The 24mm spindle is pressed into the drive-side crank arm for durability and easy installation. The non-drive side crank arm features a 2-bolt pinch system for added strength. Our unique 4-bolt 104 BCD spider features a flex-resistant ring for optimum performance. Box Four Cranks feature steel pedal inserts that require pedal washers and external sealed bearing BSA bottom brackets, and both are provided in the box. Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard FEATURES - Oversized Bottom Bracket Interface - Dual Pinch Bolts for Even Clamping Force - Spider with Flex-Resistant Ring COMPATIBILITY - Box Two Chainring - Box One Chromoly Chainring Bolts - Box One 7075 Alloy Chainring Bolts - Box Two 24mm bottom bracket - Box Extremum RacePrep bottom bracket
$265.00
Defy the norms. The hollow Si crankset, paired with the any SpideRing, is an impressive upgrade for any mountain or road bike. Where it thrives: Challenging trails, the open road, up and down hills What it's built for: Durability, efficiency Highlights: - Compatible with all SpideRings and HollowGram spindles - Self extracting bolts for easy removal - 172g/arm including hardware
$265.00
Defy the norms. The hollow Si crankset, paired with the any SpideRing, is an impressive upgrade for any mountain or road bike. Where it thrives: Challenging trails, the open road, up and down hills What it's built for: Durability, efficiency Highlights: - Compatible with all SpideRings and HollowGram spindles - Self extracting bolts for easy removal - 172g/arm including hardware
$90.00
The new Eagle 70 crankset is a sleek, sturdy answer to a growing demand for robust and aesthetically pleasing components. Featuring 3-bolt chainring compatibility, the Eagle 70 crankset features a stamped steel T-Type chainring with optional bashguards for optimal durability and protection on the trail.? Features - Aluminum crankarm with 3-bolt T-Type chainring. - Available in 175mm, 170mm, 165mm lengths. - Bashguards shared with 90, GX and X0 T-Type chainrings. - 6061 DUB Spindle. - DUB Wide spindle for 55CL.
$155.00
The new Eagle 90 crankset is a sleek, sturdy answer to a growing demand for robust and aesthetically pleasing components. And with availability down to shorter 155mm and 160mm lengths, it gives riders more freedom to build their bike, their way. Featuring 8-bolt chainring compatibility, the Eagle 90 crankset includes a silver stamped steel T-Type chainring with optional bashguards for durability and protection on the trail. Features - Forged aluminum crankarm with 8-bolt T-Type chainring compatibility. - Available in 175mm, 170mm, 165mm, 160mm and 155mm lengths. - Stamped steel chainring for maximum durability or aluminum chainring for minimal weight. - No-nonsense, no-compromise. Two independently removeable composite bashguards. Chainring size specific. - Bashguards shared with GX and X0 T-Type chainrings. - DUB Wide spindle for 55CL
$100.00
The Eagle 90 Transmission E-MTB crank is a sleek, sturdy answer to a growing demand for robust and aesthetically pleasing components. This unique design is forged from aluminum for robustness and dependability without compromising weight. Select E-MTB motors pair with our GapCap for an aesthetically pleasing integrated look. Features - 150mm, 155mm, 160mm, 165mm, 170mm E-MTB lengths. - Available for SRAM Powertrain, or Brose system equipped bikes. - Available for Bosch system equipped bikes. - Available for new Bosch CX BDU38 system equipped bikes. - Crank arm GapGap removeable for compatibility with other ISIS spindle-based motor systems.
$150.00
The X0 Eagle E-MTB crankset is all the durability you expect from X0 optimized for E-MTB. The eye-catching all-aluminum design utilizes a perfectly balanced stiffness-to-weight ratio. The X0 Eagle E-MTB Crankset and X0 Eagle Transmission (T-Type) direct mount chainring delivers premier shifting performance, reliable strength, and optional bolt-on guards to protect your ring in the roughest terrain. - All aluminum construction - Optimized stiffness to weight ratio
$280.00
Sharpened For Speed We designed the new STYLO Carbon crankset for riders who feel most at home when riding endless single track. This is a completely new crankset, employing our proprietary layup technology. Built tough to handle lines through rock gardens and trail, the new STYLO Carbon is strong, stiff, and light. Combined with the new SRAM Eagle direct-mount chainrings, it's a compatible crankset to the Eagle drivetrain. DUB technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination, and forward and backward compatibility. Now everyone can benefit from a new measure of durability. Features: - Proprietary carbon layup technology. - Fully compatible with any 1x drivetrain. - DUB technology features a uniform approach to bottom bracket fitment, better sealing against contamination, and is forward and backward compatible. - Direct-mount ring. - ISO 4210 compliant. See Declaration of Conformity for details. Specifications: - Speeds: 11/12 - BB Compatibility: DUB BSA MTB 100, DUB PF MTB 121, DUB BSA73,DUB PF89.5,DUB PF92,DUB PF30 MTB73,DUB BB30 MTB73, DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Chainring Size: 30, 32, 34 - Crank Arm Length: 170mm, 175mm - Chainline: 49.0mm, 52.0mm, 55.0mm, 66.5mm, 76.5mm - BB Spindle Interface: DUB - Chainring Material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD): Direct Mount (DM) - Crank Arm Material: Carbon
$1,100.00
Tracking your progress on gravel just got easier and more accurate. With our new spider-based power meter and removable Thread Mount chainrings, the RED XPLR AXS power meter is lightweight, reliable in all weather, and accurate within +/-1.5%. With dual-sided power measurement, even your loftiest gravel training goals are within reach. FEATURES - All-new design with removable and replaceable Thread Mount chainrings, available in 38T-46T - Power readings are accurate within +/-1.5% and aren’t affected by climate conditions during a ride - User replaceable CR2032 battery with 200-hour battery life - Measures right and left leg power balance - Ultra-light hollow carbon fiber crankarms are 29 g lighter than the previous generation - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Available in 160, 165, 167.5, 170, 172.5, and 175 mm lengths
$650.00
Gravel bikes deserve our lightest and stiffest cranks too. The RED XPLR crankset maximizes tire clearance and features our hollow carbon arms paired with the direct mount 1x chainring of your choice. Now available in 160mm crankarm length, this crank is built to please every rider, even those who prefer the unpaved. FEATURES - Single-ring drivetrain simplifies functionality and reduces weight - Non-aero direct mount chainrings from 38T to 46T can be swapped with a single tool - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Ultra-light hollow carbon fiber crankarms - DUB bottom bracket adds durability and simplicity - Can be upgraded to a power meter - Available in 160, 165, 167.5, 170, 172.5, and 175 mm lengths
$199.99
- Super compact Adventure design allows for smaller more ideal ring sizing - Modular crankset: choose your chainring sizes - Cold forged 6061-T6 aluminum arms for extra strength with 24mm steel spindle - Shimano 10/11 speed compatible -*Chainring sold separately. 110BCD outer and 74BCD inner - A 68/73mm external bottom bracket with sealed cartridge bearings is included
$69.99
Featuring a JIS square taper standard, our oversized bottom bracket interface showcases a step-down shape specific to the crank arm-length meeting at the pedal boss. Unlike alternative options, no two lengths are the same. Our durable cold-forged cranksets are available in sizes from 135mm through 170mm and employ a 5-bolt 110 BCD chainring pattern. All JIS square taper standard cranks are compatible with all BSA European-style square taper bottom brackets. FEATURES - Oversized Bottom Bracket Interface - Durable Cold-Forged Construction - JIS Square Taper Design COMPATIBILITY - Box One Bottom Bracket Square-Taper Titanium/Carbon - Box Two Bottom Bracket Square-Taper Chromoly - Box Three Square Taper Steel Bottom Bracket - Box One Chromoly Chainring Bolts - Box One 7075 Alloy Chainring Bolts
$434.99
Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 168mm Q-Factor
$288.00
SRAM's Force 22 Crankset uses unidirectional carbon arms with a forged aluminum spider and integrated bottom-bracket axle to ensure top-notch stiffness for awesome power transfer and exceptionally low weights. Experience phenomenal front shifting with SRAM's X Glide R chainrings that start out as 5mm-thick aluminum plates and then precision machined to eliminate all unessential material while retaining extreme stiffness. With so much great technology and 11-speed compatibility, they're a force to be reckoned with.
$178.00
- Cold forged AL6061/T6 aluminum crank arms - Forged AL7050 BB386EVO spindle - AL7075 100% CNC chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems
$140.00
Elegant and secure direct-mount X-SYNC chainrings from the company that originated the 1x drivetrain for the ultimate in consistent chain control over the long haul. - DUB bottom bracket adds durability and simplicity - Wide-chainline crankset to fit the biggest gravel tires - Longer DUB crank spindle accommodates both Road- and MTB-width bottom bracket standards for unmatched cross-compatibility across brands - Compatible with 135mm, 142mm, and BOOST rear spacing - BB not included
Page 1 of 9 Next page