Wheels

CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. COUNTLESS CONFIGURATIONS CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately on our Replacement Hub Parts page. WHY CHOOSE CZR I23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases. Read below for more info.

- 27"x 1 1/4 alloy road wheels assembled in the USA - Alex AP18 silver anodized alloy 27" rims w/ 36 holes - Extremely strong dual cavity rim profile developed for Sta-TruWheels, Inc. - KT alloy road hub silver road hub - Offered with silver UCP spokes - QR wheel

- Affordable and reliable 26" disc brake wheelset for entry-level hybrid, MTB and touring bikes - Black Alex Z1000 single wall rim offers great performance and look at a low price - Non-machined sidewalls give best results with disc brakes, but can also be used with rim brakes - Black Shimano Tourney TX505 and TY505 Center Lock disc hubs feature adjustable cup-and-cone bearings for trouble free long term performance & quick release 100mm front axle for increased convenience - 36 stainless steel spokes and brass nipples for improved durability

Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings

- The Prologue Series is a series of budget-friendly, economical wheel builds. - By utilizing a more automated layup process (which adds approximately 20 grams per rim), costs are kept down to spec a wheelset that has incredible performance for half to one-third of the costs of premium models. - The Prologue rims feature a hooked tire interface so you can use any tire brand at any pressure and not worry about the catastrophic tire blow-offs that a road hookless rim can suffer. - All Prologue series wheels come with the Skyuka hubs featuring 10-degree engagement and Abec 3 sealed cartridge bearings. - Built with Pillar Aero 1423 spokes and external brass nipples, the Prologue is built to be a great budget upgrade that can be used for everyday riding

- High quality entry-level 29" MTB disc brake wheelset - 15 x 100mm thru axle - Tubeless-ready Alex MD19 rim is strong and lightweight (500g) - Shimano MT400 hub features adjustable cup-and-cone bearings, aluminum front axle for a perfect blend of toughness, lightness, durability and reliability - 32 black stainless steel spokes and brass nipples for long term reliability

Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape

- Evo Tour 19 27.5" double wall rim—Black - Inner Rim Width: 19 mm - Rim Height: 20 mm - Pin joint construction - No Eyelets - Schrader valve - 36 holes - Stainless steel spokes—Silver - Freewheel

Rims: WTB DX18 26'' (ETRTO 559), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub: Shimano HB-M475 (Black) - 9x100mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub - Quick Release Binder included Rear hub: Shimano FH-M475 (Black) - 10x135mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub and freehub body - Quick Release Binder included - Compatible with 8,9,10 speed (MTB 11 speed requires 1.85mm spacer, not included) Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Modern, high quality 700c entry level Gravel / CX / Road Disc wheel - 100mm front quick release axles - 100% tubeless ready out of the box: tubeless tape and brass tubeless valve pre-installed! - Alex GD24P rims are, strong, light and feature a 21mm internal width that is perfectly suited to tires sizes from 25mm to 50mm - Shimano M475 hubs feature adjustable cup-and-cone bearings and MTB-grade sealing for trouble free performance in all conditions - 32 black stainless steel spokes and black brass nipples for long term reliability & good looks

Rims: WTB DX18 26'' (ETRTO 559), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Rear hub (041812-02-26): Alloy, Freewheel, Sealed, Quick Release, Hollow CrMo axle M10x135mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included Rear hub (041812-03-26): Alloy, Shimano HG, Sealed, Quick Release, Hollow CrMo axle M10x135mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included Rear hub (041810-02-26): Alloy, Freewheel, Sealed, Bolt-On, Solid CrMo axle 3/8'' x 135mm (L:175mm) - Anodized black finish - Adjustable bearings - Flange Nuts included

- Evo Tour 19 26" double wall rim - Inner Rim Width: 19 mm - Rim Height: 20 mm - Pin joint construction - No Eyelets - Schrader valve - 36 holes - Stainless steel spokes - Silver

Rims: Evo Tour 19 26" - ETRTO 559-19 - Inner width: 19mm - 6061-T6 Alloy - Double Wall - Powder Coat satin black finish - CNC machined sidewalls - Drilled for Schrader valve - Rim or Disc Brake compatible - 36 holes Rear hub: - QR 10x135mm (Quick Release binder included) - 6-Bolt ISO disc mount - 6061-T6 Alloy - Anodized black finish - Adjustable bearings - Rubber seals - HG freehub compatible with 8/9/10 speed

Rims: WTB DX18 26'' (ETRTO 559), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub: Shimano HB-M475 (Black) - 9x100mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub - Quick Release Binder included Rear hub: Shimano FH-M475 (Black) - 10x135mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub and freehub body - Quick Release Binder included - Compatible with 8,9,10 speed (MTB 11 speed requires 1.85mm spacer, not included) Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Rear hub: Alloy, Disc and Rim brake compatible, Shimano HG, Sealed, Quick Release, Hollow CrMo axle - Anodized black finish - Adjustable bearings - Quick Release Binders Included Assembled in North America by experienced wheelbuilders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Shimano HB-M475 (Black), Shimano logo, M9x100mm - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick-Release binder included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

Rims: WTB HTZ i30 29" - ETRTO 622-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hub: Shimano XT FH-M8010-B (Boost, HG) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Brass Polyax Nipples (Black)

Rims: WTB HTZ i30 29" - ETRTO 622-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hub: Shimano XT FH-M8130-B (SuperBoost, MS) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Brass Polyax Nipples (Black)

Sta-Tru Double Wall Rear Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27.5" - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - ISO Diameter: 584 / 650b / 27.5" - Valve: Schrader - Tire Type: Clincher - Rear Axle: QR x 135mm

Sta-Tru Double Wall Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / road / 29" - Valve: Schrader - Tire Type: Clincher

High end, bladed straightpull spokes and the most reliable and light weight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip and lightweight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them. So the PRC 1400 SPLINE 35 is ready for anything, are you? - Spline 240S based hub

At the core of this all-around wheelset lies a modern, wide and light aluminum rim. Being the foundations of the wheel, it makes for a balanced width to stiffness to weight ratio. The rim is complemented by DT's proven pawl drive system and a high end build with bladed spokes and alloy nipples. These features make it a premium training wheel easily able to race your mates to the city limits sign. - Spline hub with 3-pawl system - Straight-pull hub and spokes are radial laced - Includes RWS Eco skewer, tubeless ready tape and tubeless valve

Are you already planning your next bikepacking trip? The GR 1600 wheels are made for gravel adventures and all those unique experiences one can find far away from the tarmac and the rest of the road cycling community. A super durable aluminum wheel made of reliable components that supports you for endless miles of troublefree riding pleasure. Ready to explore the world? With the GR 1600 you definitely are. - 350 based hub

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT AeroComp straight pull spokes, DT ProLock Squorx ProHead aluminum spoke nipples

A carbon structure optimized for impact resistance, a reinforced flange and the ideal resin-carbon fiber ratio make the EXC 1200 Spline the benchmark in the Enduro sector. The rim's inherent strength allows the use of extremely lightweight Aerocomp and Aerolite spokes and generates optimum wheel stiffness. The heart of this wheel is a 180 Straight Pull hub with smooth-running SINC Ceramic bearings and the newest Ratchet EXP freehub system. - Requirement-specific carbon rims are designed for the ultimate enduro riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - SINC ceramic hub bearings are engineered with optimum bearing clearance for minimum friction - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT ProLock Squorx ProHead aluminum spoke nipples

Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.

The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub completes this durable and versatile wheel. - Designed for All Mountain applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

The 350/XM421 front wheel features a DT350 straight pull, front boost Center-Lock disc hub, built with Champion spokes to a 28 hole 29" DT XM421 rim.

Upgrade or refresh your bike. When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. PRODUCT DETAILS - Original equipment replacement Bontrager Connection Disc wheels - Durable double-wall rim with 20mm internal, 26mm external width - Black rim graphics and spoke nipples - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

- Zipp’s ultimate road racing wheelset. Aerodynamically efficient and stable in all wind conditions. - Optimized for 28mm tubeless tires at lower pressure for reduced rolling resistance and vibration damping. - Total System Efficiency (TSE) approach addresses wind resistance, gravity, rolling resistance, and vibration losses. - More than 400 grams lighter than its predecessor - Hookless rims for a more seamless and aerodynamic transition between tire and the rim - Cognition V2 Hubset with an updated Axial Clutch V2 mechanism for quicker engagement, lower friction, and improved durability. - Center locking rotor interface. Lockring is included with the wheels - 1360g - Lifetime warranty

Upgrade or refresh your bike. - Original equipment replacement Trek Duroc 40 27.5 Boost wheels - 15x110mm front, 148x12mm rear, 6-bolt disc, and SRAM XD freehub - Extra wide alloy rim (40mm outer, 36mm inner width) is perfect for Plus tires - 550g rim is double wall, welded, and disc-specific

Rims: Alex GD24P - ETRTO 662-21 - Inner width: 21mm - Profile height: 24mm - Disc Brake Only - For Presta valve - 32 holes Rear hub: Shimano 105 FH-RS7070 - 12x142mm E-THRU (Axle not included) - Center Lock Disc Mount - Polished angular contact bearings with Internal Grease Sleeve - Contact sealed hub and freehub body - Compatible with 11 speed Road (10 speed compatibility requires 1.85mm spacer, not included) Assembled in North America by experienced wheel builders with Sapim Race Butted Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: EVO JP95 27.5" - ETRTO 584-94 - Inner width: 94mm - Disc Brake Only - Drilled for Schrader valve - 32 holes Front hub: Novatec D201SB - 15x150mm (Axle not included) - 6-Bolt Disc Mount - Sealed cartridge bearings (x2) Assembled in North America by experienced wheelbuilders with Sapim stainless steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB CZR i30 Carbon 29" - ETRTO 622-30 - Inner width: 30mm - Torayca T700 UD carbon fiber for stiffness and compliance - Asymetric and angled spoke hole drilling - Externally reinforced spoke bed - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Front hub: Shimano XT HB-M8110-B Boost - 15x110mm (Axle not incl.) - Center Lock (6-Bolt adapter incl.) - Polished angular contact bearings - Contact sealed hub Rear hubs options: Shimano XT FH-M8010-B (Boost, HG) / FH-M8110-B (Boost, MS) / FH-M8130-B (SuperBoost, MS) - Center Lock (6-Bolt adapter incl.) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible 10/11 speed MTB (12 speed HG with 1.85mm spacer, not included) - MS compatible 12 Spd Micro Spline Sold in Pair, including: - Tubeless Valve (x2) Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Polyax Nipples (Black)

CRC 1400 Spline wheels are ready to conquer the harshest conditions with convenience. Never mind if the conditions are windy, muddy or rainy, the CRC 1400 Spline is ready to conquer them all. The aero-optimized rim supports your high speeds on descents and on the hunt for your competitors, no matter where the wind blows. The rim profile is tubeless ready, allowing you to take advantage of the technology and simply and conveniently change the tires according to the prevailing conditions of the track. This will ensure you always find the sweet spot between traction and rolling resistance.

XC, redefined. Equally ready on the start line or the trailhead, this wheelset meets the descending and climbing needs of modern XC, and then some. Where it thrives: In competition, challenging trails What it's built for: Precision, control, efficiency Highlights: - Carbon fiber construction, 25mm internal width, tubeless compatible - DT Swiss Aerolite spokes / DT Swiss 240 hub internals - 28h straight pull hubs / Weight: 1470g (pair)

ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology

Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore—is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure. - All-day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement - Lifetime Warranty

Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore-is purpose—built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure. - All-day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement - Lifetime Warranty

The Rampage 24-inch front wheel features a sealed front hub with a 3/8" chromoly axle and is laced to a Rampage double-wall rim. It's designed for BMX 100mm wide forks. - Axle: 3/8-inch chromoly - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6000 (x2) verify bearing number on side of rubber seal - Includes Stolen PVC rim strip - Drilling: 36H - Includes Stolen PVC rim strip

- Affordable and reliable road rim brake wheelset - Black rim and hubs for a more modern look - Semi-aero Alex DA22 rim is light (450g) and stiff - Shimano Tiagra-grade RS400 hubs feature smooth, adjustable cup-and-cone bearings with polished races for superior, long lasting performance - 32 stainless steel spokes and brass nipples for long term reliability - 8-11 speed compatible Shimano HG11 freehub body.

Big tires and wide rims normally mean heavy wheels. But not with the BR 2250. Nearly as light as standard wheels and with the grip only fatties can offer, this wheelset turns any fat bike into a fun-machine. - Intended Use = Fat Bike - Internal Rim width = 76mm; External width = 81mm - 18 step star-ratchet drive system - Black J-bend spokes built with a 3-cross pattern and silver alloy Pro Lock nipples - Set up for 197mm thru axle with Shimano 9/10 freehub body installed - Includes 190mm thru axle end caps for Shimano freehub body, XD Driver with 190mm and 197mm thru axle end cap, 6-bolt adapter and rim strip - Tubeless kit in development

Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 Year No Fault Guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos

- Large oversized flange for improved bracing angle making a stiffer wheel - Larger bearings spaced wider apart for better stability and durability - 30mm internal width tubeless ready rim

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes - Black Ops MX1100 hubs with sealed bearings and laced with DT spokes - 24mm inner rim width supports a variety of modern sizes - OLD: Front: 100mm, Rear: 110mm - Gears: Singlespeed freewheel - Type: Tube only - Size: 29-inch

How do you make super better? Make it tubeless. Zipp’s go-to triathlon and time trial weapon, the Super-9 Tubeless Disc disc-brake wheel is tubeless ready with a 18mm internal width. That means you can lower tire pressure for a host of benefits: better cornering grip, better compliance, and reduced rolling resistance. With tubeless, you get all this without the risk of pinch flats. So, go attack the course. The Super-9 gives you the technology needed to do your best. The Super-9 Carbon Clincher optimizes supreme aerodynamics, power transfer, stiffness, lightweight and durability. Add to that the modulation and stopping power of disc brakes, you’re ready to set that PR. - Zipp graphics and cosmetic identity that screams speed applied with our ImPress direct-print technology - 18mm internal width and tubeless compatibility for optimization of wider tires with lower tire pressure, lower rolling resistance, and increase grip and compliance - Greater stopping power and modulation of disc brakes - Aero, durable, light weight - Center locking rotor interface. Lockring is included - XDR or SRAM/Shimano driver bodies - Campagnolo driver body sold separately

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-M4050 (Black), Shimano logo, M10x135mm - HG Freehub compatible with 8—10, MTB 11-speed - Center Lock disc mount - Adjustable bearings - Rear Quick Release binder included - Front E-THRU Axle not included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-MT400-B (Black), Shimano logo, 12mm E-THRU, O.L.D. 148mm BOOST - HG Freehub compatible with 8 - 10, MTB 11-speed - Quick Engagement Pawl Ratchet (36T / 10deg engagement) - Center Lock disc mount - Adjustable bearings - E-THRU Axles not included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Tubeless Valve included)

Rims: Evo Tour 19 700C / 29" - ETRTO 622-19 - Inner width: 19mm - 6061-T6 Alloy - Double Wall - Powder Coat satin black finish - CNC machined sidewalls - Drilled for Schrader valve - Rim or Disc Brake compatible - 36 holes Rear hub: - QR 10x135mm (Quick Release binder included) - 6-Bolt ISO disc mount - 6061-T6 Alloy - Anodized black finish - Adjustable bearings - Rubber seals - HG freehub compatible with 8/9/10 speed

- Evo Tour 19 26" double wall rim - Black - Rim and Disc - Inner Rim Width: 19 mm - Rim Height: 20 mm - Pin joint construction - No Eyelets - Schrader valve - 36 holes - Stainless steel spokes - Silver

Rims: WTB ST i23 24" - ETRTO 507-23 - Inner width: 23mm - Disc Brake Only - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Rear hub: Shimano FH-MT400-B Boost - 12x148mm (Axle not included) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - Compatible with 10 speed MTB (11/12 speed with 1.85mm spacer, not included) Assembled in North America by experienced wheelbuilders with Sapim stainless steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: Mavic XM119 Disc 26" (Black) - ETRTO 559-19 - External width: 24mm - Inner width: 19mm - Profile height: 20.5mm - Disc Brake Only - For Schrader or Presta valve (Adapter included) - 32 holes Front hub: Shimano HB-M475 (Black) - 9x100mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub - Quick Release Binder included

Rims: Evo Tour 19 27.5" - ETRTO 584-19 - Inner width: 19mm - 6061-T6 Alloy - Double Wall - Powder Coat satin black finish - CNC machined sidewalls - Drilled for Schrader valve - Rim or Disc Brake compatible - 36 holes Rear hub: - QR 10x135mm (Quick Release binder included) - 6-Bolt ISO disc mount - 6061-T6 Alloy - Anodized black finish - Adjustable bearings - Rubber seals - HG freehub compatible with 8/9/10 speed

- 30mm wide rim with an Enduro style layup. Designed for tires in the 2.4 to 2.7 range. - Offset rim bed for balanced spoke tension. - Tripel hub with quick 3.5 degree engagement, and super low drag. - Super strong hookless rim.

- Alex MD21 double wall 26'', disc specific rim, Black - Formula DC-20/DC-22 hubs - For All-Mountain and Cross-Country - Tubeless Ready - Inner rim width: 21mm - Outer rim width: 26mm - Rim height: 18 mm - Rim weight: 450 g - With eyelets - Schrader Valve - 32 holes - Sapim Leader Stainless spokes—Black

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Front hub: Shimano HB-MT400-B Boost - 15x110mm (Axle not included) - Center Lock (6-Bolt adapter included) - Angular contact bearings - Contact sealed hub Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)