Details
The 40th Anniversary Freestyler was created to take a DNA strand or two from our past and thread it into state of the art contemporary designs of the present. Look at this masterpiece, from a glance it's difficult to tell from the original 40 years prior. But when you look closely, you will see all modern technology. Hourglass Mid BB, internal headset. Forks are full heat treated and butted same as the lineage bars and 48 spline 19mm cranks. This bike is as high level BMX you are going to buy in todays market.
Size | A. Head Angle | B. Seat Angle | C. Top Tube | D. Seat Tube | E. Chainstay | F. BB Height | G. Stand Over |
---|---|---|---|---|---|---|---|
21 | 75° | 70° | 20.5" (520mm) | 10.2" (260mm) | 13.7" (339mm) | 11.5" (293mm) | 21.5" (546mm) |
Specs
Pedals | Haro Fusion; alloy pedal body; crmo axle |
---|---|
Fork | Haro La Bastille fork with (removable) 990 mounts and internal cable routing; 15mm offset; 3/8" axle; fluted one piece cnc cr-mo steerer; tapered fluted legs |
Hubs | F: Lineage high flange 36h alloy hub body; 3/8"x100wx155l; crmo 155mm straight axle; 2 sealed bearings / R: 9t Lineage high flange hub (male bolt); sealed bearings; 14t driver; 17mm steel flange axle nuts; all hardware in cp finish including cone nuts, axle nuts |
Stem | Haro Lineage top load stem; T6 alloy; cold forged with cnc; 45mm |
Chain | KMC K1Sl; 1/2 x 1/8; Narrow Silver Super Lite |
Frame | Lineage Freestyler frame - 20.5" full crmo; internal h/t crmo - welded brake mounts. |
Tires | Snakebite; 20x2.00; 60 max psi |
Brakes | Dia-Compe fs996 "hombre" u-brake; cold forged aluminum arms; dual spring tension adjustment w/anchor bolt parts |
Saddle | Haro Lineage slim stealth pivotal seat |
Wheels | Lineage 36h rims (double wall welded joint) |
Headset | Sealed Integrated, 1 1/8" |
Crankset | Haro Fusion cranks (bolt drive interface) rsd and lsd; 165mm; 19mm od 48-spline spindle; heat treated 4130 |
Seatpost | Haro stealth pivotal seat post; 25.4 x 300mm |
Chainrings | BOB Lineage sprocket; cnc bolt drive sprocket; 5mm alloy ring; 1/2" x 1/8" x 28t ; cross ring w/ machined teeth, included sprocket adapter |
Handlebars | Lineage bar 8.5"; 100% heat treated; multi-butted |
Tape/Grips | Oakley grip; 145mm length x 29mm diameter; 50mm od flange |
Brake Levers | Dia-Compe "tech-77" lever without stopper; right and left side; diecast aluminum bracket with hinged clamp; cold forged aluminum lever |
Bottom Bracket | Sealed MID BB |
Accessories & Extras | 6061 alloy pegs; 34mm od; 110mm length; include 4 total pegs |
* Subject to change without notice.
Part Numbers
Option | UPC | MPN |
---|---|---|
Chrome / 20.5-inch / 20-inch | 691840236218 | 23621 |